TILT & TURN · catalogue pp. 05–18

Tilt & Turn Window Hardware

Multi-point locking sets for inward-opening tilt & turn windows: handle, anti-error rod, transmission rod, locking plates, corner device and pivot hinges in one matched set.

A tilt & turn window needs every part of the set to line up: the rod that runs round the corner, the locking plates that sit in the groove, and the two pivot hinges that carry the sash. These sets are supplied as a matched group of positions, listed per window configuration.

The table below is the NPD600 configuration, printed on catalogue page 08. Seven tilt & turn configurations are covered in the catalogue: NPD600, NPD370, NPD800, NPD850, NPD870, NPD900 and the NPD200 micro-ventilation version.

H-600A Upper pivot hinge
H-600A — catalogue p. 8

At a glance

Model rows on this page
8
Maximum hardware load catalogue p. 08, p. 10
90 kg
Tilt & turn configurations catalogue pp. 05–18
7
Locking plates per set catalogue p. 08
2
Models

Specification table

Columns appear only where the catalogue prints a value for this series. Codes are shown without the printed brand prefix; the full printed code is available on request.

NPD600 tilt & turn hardware set — positions, quantity per window and catalogue remarks

NPD600 tilt & turn hardware set — positions, quantity per window and catalogue remarks
CodePartQty per setCatalogue remark
DB-8022Handle1Optional
FWCDG-02BAnti-error transmission rod1Not printed
SK-2001Locking plate2Not printed
PJ-216Corner device1Not printed
LG-214Transmission rod1Not printed
H-600AUpper pivot hinge1Left & right
H-600BBottom pivot hinge1Left & right
FZZC-204Overturn supporter1Not printed

Scroll the table sideways for all columns. The model code stays in place.

Available on request — packing quantity, carton data and the full printed model code. Tell us the model and we’ll send the data sheet.

Ask for this data
Fitting

Profile and groove

Groove as printed

Groove type is not printed with the set list; the set is matched to your profile section.

catalogue p. 08

  • The NPD600 configuration is printed for sashes 280–480 mm wide with a height-to-width ratio around 1.5 : 1; the NPD370 configuration is printed for sashes 450–650 mm wide with the same ratio.

    catalogue p. 08, p. 10

  • The catalogue prints the groove type with the profile drawings, not with the set list. Send your profile section with the inquiry and the set is matched to it before quoting.

    catalogue pp. 02, 08

Supply

Sets and single parts

  • The catalogue prints 11 positions for this set. Eight main positions are listed here; supporting block ZCK-202, shim LJ-2017 and disengagement preventer FTQ-203 are supplied with the same set.

    catalogue p. 08

  • Handle DB-8022 and the two pivot hinges H-600A / H-600B are marked optional or left & right in the catalogue, so a set can be quoted with or without them.

    catalogue p. 08

Configuration

Sizes and limits as printed

  • Suggested ratio of sash height to width 1.5 : 1; maximum load bearing capacity 90 kg (NPD370 and NPD600 pages).

    catalogue p. 08, p. 10

  • The catalogue also prints the rod cutting formulas for NPD370 and NPD600. They are kept off this site until the matching profile conditions are confirmed — ask for them with your profile drawing.

    catalogue p. 06, p. 08

Not printed in the catalogue

  • Packing quantity and carton data are not printed in the catalogue. (catalogue pp. 05–18)
  • The photo grid on page 08 shows a wind bracing XWQ-005 that has no row in the printed set list. (catalogue p. 08)

Available on request — the data the catalogue does not print. Tell us the model and we’ll send the data sheet.

Ask for this data
NEXT STEP

Quote Tilt & Turn Window Hardware

Send the profile system, groove, surface finish and the models you need with an annual volume — that is enough for a first container price.

Request a quoteDownload the catalogue