CURTAIN WALL · catalogue pp. 37–42

Curtain Wall Top-Hung Hardware

Top-hung curtain wall panel hardware: a transmission rod and locking plates along the panel, with a pegstay and a friction stay that hold the opening at a fixed angle.

Top-hung panels open at the bottom and stay open on a pegstay plus a friction stay. Because the panel is heavy and the opening is high up, the stay rating and the number of locking plates matter more than the handle.

The table below is the MQ100 configuration, printed on catalogue page 38. MQ200 (p. 40) and MQ300 (p. 42) are also in the catalogue.

HC-200A Top-hung window friction stay
HC-200A — catalogue p. 38

At a glance

Model rows on this page
6
Shims per set catalogue p. 38
4
Pegstay + friction stay catalogue p. 38
2 + 2
Sets covered catalogue pp. 37–42
MQ100–MQ300
Models

Specification table

Columns appear only where the catalogue prints a value for this series. Codes are shown without the printed brand prefix; the full printed code is available on request.

MQ100 curtain wall top-hung hardware set — positions, quantity per panel and catalogue remarks

MQ100 curtain wall top-hung hardware set — positions, quantity per panel and catalogue remarks
CodePartQty per setCatalogue remark
DB-8022Handle1Optional
CTransmission rod1Depends on window system
SK-2005Locking plate2Not printed
DK-40Shim4Not printed
SC-100/B10Top-hung window pegstay2Depends on window system
HC-200ATop-hung window friction stay2Depends on window system

Scroll the table sideways for all columns. The model code stays in place.

Available on request — packing quantity, carton data and the full printed model code. Tell us the model and we’ll send the data sheet.

Ask for this data
Fitting

Profile and groove

Groove as printed

Groove type is not printed with the set list; the panel profile is checked from your drawing.

catalogue p. 38

  • The transmission rod and both stays are marked "depends on window system" in the catalogue, because their length follows the panel width.

    catalogue p. 38

  • Top-hung friction stays HC-200A/B are listed with maximum window height, width and load in the Friction Stays series.

    catalogue p. 147–150

Supply

Sets and single parts

  • Handle DB-8022 is optional; the project set is usually the rod, locking plates, shims and the two stays.

    catalogue p. 38

Configuration

Sizes and limits as printed

  • The catalogue prints four shims DK-40 per set, which matches the four corners of the panel.

    catalogue p. 38

Not printed in the catalogue

  • Maximum panel weight is not printed for this set in the catalogue. (catalogue p. 38)
  • Packing quantity and carton data are not printed in the catalogue. (catalogue pp. 37–42)

Available on request — the data the catalogue does not print. Tell us the model and we’ll send the data sheet.

Ask for this data
NEXT STEP

Quote Curtain Wall Top-Hung Hardware

Send the profile system, groove, surface finish and the models you need with an annual volume — that is enough for a first container price.

Request a quoteDownload the catalogue