CASEMENT · catalogue pp. 19–28

Inward Casement Window Hardware

Side-hung inward-opening casement sets with two-point or multi-point locking on one or both sides, from handle and main transmission rod to pivot hinges and wind bracing.

Inward-opening casement windows use a shorter parts list than tilt & turn: a main transmission rod, locking plates, two pivot hinges and a support that keeps the sash from dropping. The variants in the catalogue differ mainly in how many sides carry locking points.

The table below is the NP500 configuration, printed on catalogue page 28: a double-side, two-point top-and-bottom lock set. The catalogue also covers NPD100 (p. 19), NP200 (p. 21) and NP300 in single-side and both-direction versions (pp. 23–26).

LJ-2007 Main transmission rod
LJ-2007 — catalogue p. 28

At a glance

Model rows on this page
7
Locking plates per set catalogue p. 28
2
Inward casement sets catalogue pp. 19–28
4
Pivot hinges per set catalogue p. 28
2
Models

Specification table

Columns appear only where the catalogue prints a value for this series. Codes are shown without the printed brand prefix; the full printed code is available on request.

NP500 inward casement hardware set — positions, quantity per window and catalogue remarks

NP500 inward casement hardware set — positions, quantity per window and catalogue remarks
CodePartQty per setCatalogue remark
DB-8012Handle1Optional
LJ-2007Main transmission rod1Not printed
FZZC-08Turning support2Not printed
H-4042Pivot hinge2Optional
LJ-2019Supporting block2Not printed
XWQ-003Wind bracing1Depends on window system
SK-2001Locking plate2Depends on number of locking points

Scroll the table sideways for all columns. The model code stays in place.

Available on request — packing quantity, carton data and the full printed model code. Tell us the model and we’ll send the data sheet.

Ask for this data
Fitting

Profile and groove

Groove as printed

Groove type is not printed with the set list; the set is matched to your profile section.

catalogue p. 28

  • The set is printed for side-hung windows with locking points on both sides. Wind bracing XWQ-003 and locking plates SK-2001 are marked "depends on window system" and "depends on number of locking points", so the quantity follows the sash size.

    catalogue p. 28

  • Groove type is not printed on this set list. Send the profile section and the set is checked against it before quoting.

    catalogue p. 28

Supply

Sets and single parts

  • Handle DB-8012 and pivot hinge H-4042 are marked optional; the structural parts of the set (main rod, turning support, supporting block, wind bracing, locking plates) are the positions that keep the sash aligned.

    catalogue p. 28

Configuration

Sizes and limits as printed

  • The catalogue pages for the other sets print their own configurations; ask for the page matching your window before ordering.

    catalogue pp. 19–26

Not printed in the catalogue

  • Maximum sash weight is not printed for this set in the catalogue. (catalogue p. 28)
  • Packing quantity and carton data are not printed in the catalogue. (catalogue pp. 19–28)

Available on request — the data the catalogue does not print. Tell us the model and we’ll send the data sheet.

Ask for this data
NEXT STEP

Quote Inward Casement Window Hardware

Send the profile system, groove, surface finish and the models you need with an annual volume — that is enough for a first container price.

Request a quoteDownload the catalogue