CASEMENT · CURTAIN WALL · catalogue pp. 147–150

Friction Stays

Stainless steel 201 and 304 friction stays with a printed table of maximum window height, width, load, opening angle and installation length for each size.

This is the one part family in the catalogue with a full specification table: every size is printed with the highest and widest window it can carry, the load, the opening angle and the installation length.

Two families are printed: HC-200A/B for top-hung windows (page 148) and PHC-0130A/B for flat open windows (page 149). Every code ends in A for stainless steel 201 or B for stainless steel 304.

HC-200A/B-12 Friction stay
HC-200A/B-12 — catalogue p. 148

At a glance

Model rows on this page
6
Stay families catalogue pp. 148–149
2
Materials catalogue pp. 148–149
Stainless 201 / 304
Load range listed catalogue pp. 148–149
38 – 72 kg
Models

Specification table

Columns appear only where the catalogue prints a value for this series. Codes are shown without the printed brand prefix; the full printed code is available on request.

Friction stay sizes — maximum window size, load, opening angle and installation length A

Friction stay sizes — maximum window size, load, opening angle and installation length A
CodeMaterialMax. window height (mm)Max. window width (mm)Max. load (kg)Open angleInstallation length A (mm)
Top-hung window stays — suitable for top-hung windows (p. 148)
HC-200A/B-12Stainless 201 (A) / 304 (B)8006005230° ± 2317
HC-200A/B-14Stainless 201 (A) / 304 (B)10007005730° ± 2359
HC-200A/B-16Stainless 201 (A) / 304 (B)12008006230° ± 2415
HC-200A/B-18Stainless 201 (A) / 304 (B)14009007230° ± 2467
Friction stays — used for flat open windows (p. 149)
PHC-0130A/B-16Stainless 201 (A) / 304 (B)17007003888°417
PHC-0130A/B-18Stainless 201 (A) / 304 (B)18008004385°462

Scroll the table sideways for all columns. The model code stays in place.

Available on request — packing quantity, carton data and the full printed model code. Tell us the model and we’ll send the data sheet.

Ask for this data
Fitting

Profile and groove

Groove as printed

Screwed to the frame and the sash; the catalogue prints no groove requirement for stays.

catalogue pp. 148–149

  • Choose the size by maximum window height and width first, then check the load: HC-200A/B-12 carries 800 × 600 mm at 52 kg, HC-200A/B-18 carries 1400 × 900 mm at 72 kg.

    catalogue p. 148

  • The code suffix is the material: A = stainless steel 201, B = stainless steel 304. Both are produced to the same dimensions.

    catalogue pp. 148–149

Supply

Sets and single parts

  • Stays are supplied per piece and quoted per size and material, so a window can be ordered with the stay material your market requires.

    catalogue pp. 148–149

Configuration

Sizes and limits as printed

  • Installation dimension A is printed for every size: 317, 359, 415 and 467 mm for HC-200A/B-12 to -18; 417 and 462 mm for the two PHC-0130A/B sizes listed here.

    catalogue pp. 148–149

  • PHC-0130A/B-10, -12 and -14 are also printed on page 149 (A = 274, 313 and 365 mm) but are not listed in this first release.

    catalogue p. 149

Not printed in the catalogue

  • Packing quantity and carton data are not printed in the catalogue. (catalogue pp. 147–150)
  • A window limiter family (XWQ-10) is printed on page 147 with three sizes; it is not a series page in this release. (catalogue p. 147)

Available on request — the data the catalogue does not print. Tell us the model and we’ll send the data sheet.

Ask for this data
NEXT STEP

Quote Friction Stays

Send the profile system, groove, surface finish and the models you need with an annual volume — that is enough for a first container price.

Request a quoteDownload the catalogue