Manufacturing & OEM

Own tooling, seven production steps, one address

Ouzhilun makes moulds and the parts that come out of them in the same plant, on 10,800 m² in Ruian, Zhejiang. That is what lets a window maker change a part, a finish or a packing list without a second supplier in the chain.

The chain

Seven in-house steps, in order

  1. 01

    Tooling & mould making

    Dies and moulds for stamping, die casting and injection moulding are made in-house, so a new part or a changed part does not wait for an outside tool shop.

  2. 02

    Stamping

    Brackets, plates, rods and stays are blanked and formed from strip and sheet.

  3. 03

    Die casting

    Metal bodies for handles, lock houses and hinge parts are cast in the same plant.

  4. 04

    Injection moulding

    Plastic covers and PVC-window parts are moulded in the same plant as the metal parts they fit.

  5. 05

    Surface finishing

    Polishing and plating give the metal parts their final colour and surface protection.

  6. 06

    Assembly

    Parts are assembled, checked against the set list and packed per window configuration.

  7. 07

    Inspection

    Incoming material, in-process parts and finished goods are inspected before shipment.

The seventh step is inspection. The three inspection stages and the quality system are described on the Quality page.

OEM process

Four steps from your drawing to your brand

Each step lists what we need from you, so nothing waits on a question that could have been answered up front.

Step 1Drawing or sample

What we need from you

Send the profile section drawing (or a physical profile sample), the window type and sash size, the groove you use and the finish you want.

What happens next

We check the drawing against a matching catalogue configuration and reply with the set list before any tooling is discussed.

Step 2Tooling

What we need from you

Confirm the part that needs a new or changed mould, the material and the surface finish.

What happens next

The mould is made in-house and the first samples are sent for your approval against your drawing.

Step 3Trial run

What we need from you

Approve the sample and confirm packaging: branded box, neutral box or bulk.

What happens next

A trial batch is produced and inspected so fit and finish are confirmed before volume.

Step 4Volume production

What we need from you

Confirm the order quantity, the packing list and the delivery schedule.

What happens next

Production runs against the approved sample; inspection and packing records travel with the shipment.

What you can change

Four things buyers change first

Each of these is agreed per order in the inquiry — the conditions, quantities and prices are not published here because they depend on the part and the volume.

Customer logoYour mark on the part, the base plate or the packaging, using the tooling already made for that part.
Branded colour boxRetail-ready boxes printed with your artwork for sets and for single parts.
Neutral packingUnbranded poly bags and cartons for importers who label in their own warehouse.
Own model codeYour own code on the label and the packing list, mapped to the catalogue code we produce.

Available on request — order conditions and commercial terms. Tell us the model and we’ll send the data sheet.

Ask for this data
Before you write

What to attach to the inquiry

The contact form is short. Put the technical detail in the message field and the first answer already has what it needs.

Start an OEM inquiry
  • Profile system and the groove you use (C groove, U groove, European groove or no groove)
  • Window or door type and sash size
  • Surface finish you want
  • Models and quantity per model
  • Estimated annual volume
  • Whether the parts ship under your brand
OEM NEXT STEP

Send your drawing, not a general question

A profile section, a window type and an annual volume get you a set list and a tooling answer instead of a catalogue page.

Request a quoteDownload the catalogue